Skip to main content

Raw Linseed Oil - Huile de lin crue

Raw Linseed Oil is made from the cold pressing of flaxseeds. This natural, raw flaxseed oil comes from Italian organic farming. It is characterized by a high level of polyunsaturated fatty acids and a high content of linolenic acid. It is used as a binder for oil paintings, mediums and fatty varnishes. It can be used for interior wood finishing and creates a satin finish that is water and alcohol resistant. It can be used as a concrete, slate or clay sealer. It can be used for making your own oil paints or a protective oil glaze.

VOC: 0.00g/l (Limit value 2010:400g/L)

Coverage: 120 to 230 sq ft / L

Odour: slight odour

Durability: Interior structures and woodwork: 3-7 years. Floors: 1-3 years. Paneling: 1-5 years, Furniture: 1-3 years

Aspect: Viscous liquid slightly amber

Storage: Store, tightly sealed, in original container at room temperature, away from heat or frost.

Compatible with: most milk paints, chalk paints, mineral paints, stains and varnishes. It is recommended to carefully read the MSDS of the product prior to use.

Shelf life: 5 years

Cleaning: use oil thinner, soap and water

Directions for finishing wood surfaces:

Sand the wood surface evenly with 120 grit sandpaper and remove any dust. Stir the linseed oil as you dilute with 30% oil thinner. Apply a generous coat of linseed oil with a brush, cotton rag or a stain applicator. Wait 20 mins. Remove excess/ remaining oil with a clean rag. Apply 3 coats but allow each coat to dry before applying the next. The first coat will take 12 hours to dry and the second and third coats will require 24 hours to dry. For a smoother finish, sand the surface lightly between each coat with 800 grit sandpaper. Wait at least 14 days before the first cleaning.

Directions for sealing Concrete, slate, clay: 

The application is the same as for wood, described above. The number of coats required may vary depending on how porous your surface is.

Directions for making oil paints:

Pour 2-3 tablespoons of linseed oil in a bowl and add Color Rare pigment, a bit at a time, until a doughy paste forms. Continue to add more oil until the mixture reaches the consistency required. If required, add solvent (oil thinner) until the paint reaches your desired consistency. If required, pour the finished mixture through a strainer to remove lumps.

How to make a basic oil glaze:

Oil glazes can be applied over flour or milk paints to increase water resistance. Oil glazes also make beautiful wood stains, with or without added color. This method makes about 2 cups of glaze.

Dissolve 1 tsp each of Color Rare pigment and Color Rare whiting powder in 1/2 cup of linseed oil. Mix in an additional 1/2 cup of linseed oil. Add 2/3 cup of natural solvent and 2 tbsp of whiting powder, whisking or straining to remove lumps. Apply to clean and dry surface and let dry.

Warning: This product is combustible and an irritant (Xi). Keep out of reach of children. Materials used in the application of this product (rags, brushes, etc.) may also combust. After every use, put rags/ tools in water or lay flat to dry, then discard.

For more information see the Material Safety Data Sheet.

Colors shown are for information purposes only: Actual colors may vary from the color on your screen due to monitor differences.

Raw Linseed Oil - Huile de lin crue

from $25.00 CAD