-Apply on dry, clean and dust-free surfaces.
-Apply only on interior/ exterior surfaces of natural paints or coatings. Do not apply on synthetic paints.
-Apply in very thin layers using a spalter brush (flat and fine brush). Stretch the product (do not “overload” the brush) in order to avoid whitish traces. Wipe the glaze with a soft cloth if required.
-Use a maximum 15% pigment volume. It is best to pass the first coat with very little pigment and adjust the dosage for subsequent layers.
-Appropriate temperatures for application, between 7°C and 27°C (45°F and 80°F).
-Brushes and tools can be cleaned with soap and water.
-Between 6 and 12 hours depending on the room’s temperature and humidity level.
-The look/definitive coverage is obtained only after the glaze is completely dried. Respect stipulated drying times; it is imperative to have a fully dry surface before applying the next coat.
-The slight odor due to the natural ingredients disappears once drying is complete.
INGREDIENTS: Lime water, methylcellulose, ammonia, bactericidal without formaldehyde, 3% synthetic resin and essential oils.
DILUTION: Dilute with water, from 5 to 10%, according to the porosity of the surface and desired consistency. The more porous the surface, the more water needs to be added. The paint must have a good fluidity when ready to apply. Be careful not to dilute the product too much.
COVERAGE: 100 to 150 sft (10 -15 m²) per litre depending on the surface's porosity and the dilution of the glaze.
STORAGE: 12 to 24 months, in a hermetically sealed container. Store in a dry environment protected from frost.
WARNING: KEEP OUT OF REACH OF CHILDREN -Do not swallow or inhale -The use of safety glasses and facemask is recommended due to risk of projection while handling - In case of eye contact, flush immediately with water - If you have sensitive skin, it is recommended to use gloves while handling - Use with adequate ventilation - Always test a small patch area first.