-Apply on dry, clean and dust-free surfaces.
-Apply only on interior surfaces of natural paints or coatings. Do not apply on synthetic paints.
-Apply in very thin layers using a spalter brush (flat and fine brush). Stretch the product (do not “overload” the brush) in order to avoid whitish traces. Wipe the glaze with a soft cloth if required.
-Use a maximum 15% pigment volume. It is best to pass the first coat with very little pigment and adjust the dosage for subsequent layers.
-Appropriate temperatures for application, between 7°C and 27°C (45°F and 80°F).
-Brushes and tools can be cleaned with soap and water.
-Between 3 and 12 hours depending on the room’s temperature and humidity level.
-The look/definitive coverage is obtained only after the glaze is completely dried. Respect stipulated drying times; it is imperative to have a fully dry surface before applying the next coat.
-The slight odor due to the natural ingredients disappears once drying is complete.
INGREDIENTS: Milk, egg, borax, calcium carbonates, methylcellulose, arabic gum.
DILUTION: Use approximately 100g of powder glaze for 1 litre of water. Mix with a whip until mixture is homogeneous. Let stand 15 to 20 minutes before application. Use less water for higher concentration.
COVERAGE: 100 to 150 sft (10 -15 m²) per litre depending on the surface's porosity and the dilution of the glaze.
STORAGE: 12 to 24 months, in a hermetically sealed container. Store in a dry environment protected from frost.
WARNING: KEEP OUT OF REACH OF CHILDREN -Do not swallow or inhale -The use of safety glasses and facemask is recommended due to risk of projection while handling - In case of eye contact, flush immediately with water - If you have sensitive skin, it is recommended to use gloves while handling - Use with adequate ventilation - Always test a small patch area first.